SS 3017-V Remote I/O module 8 channel +/-10V input on RS-485 network
The SS 3017 device is able to acquire up to 8 analog input signals. Data values are transmitted with MODBUS RTU/ASCII protocol on the RS-485 network (RS-232 interface is available).
It is possible to connect up to +/- 10V voltage signals.
By means of a 16 bit converter, the device guarantee a high accuracy and a stable measure versus time and temperature.
To ensure the plant safety, two Watch-Dog timer alarms are provided.
The 2000 Vac isolation between input, power supply and serial line removes eventual ground-loop effects, allowing the use of the device even in the heavy environmental conditions.
SS 3017 is in compliance with the 89/336/EEC directive on the electromagnetic compatibility.
The device is housed in a rough self-extinguishing plastic container which, thanks to its thin profile of 17.5mm only, allows a high density mounting on EN-50022 standard DIN rail.
- Field-Bus remote data acquisition
- RS-485 Master/Slave communication type
- MODBUS RTU/ASCII
- 8 channel input
- Up to +/- 10V input
- Watch-Dog Alarm
- Remotely Configurable
- 2000 Vac 3-way Galvanic Isolation
- High Accuracy
- EMC compliance – CE mark
- DIN rail suitable mounting - EN-50022 compliance
Manuals and guides
|Maximum current consumption||45 mA @ 24 VDC|
|Communication protocol||Modbus ASCII, Modbus RTU, Modbus TCP (using SS3580 converter)|
|Insulation voltage||1500 Vca @ 50 Hz for 1 minute between inputs, outputs, serial and supply|
|EMC Immunity||conform to EN 61000-6-2|
|EMC Emissions||conform to EN 61000-6-4|
|Supply voltage||from 10 to 30 VDC|
|Polarity inversion protection||maximum 60 VDC|
|Humidity||operating environment from 0 to 90 % (non condensing)|
|Storage temperature||from -40 to +85 ºC (without ice)|
|Mounting||on EN-50022 DIN rail|
|Weight||about 150 g|
|Temperature||operating environment from -10 to +60 ºC|