SS 10017-I Distributed I/O device in 6 DIN module box 8 inputs for mA over RS-485

€168.00
In stock
SKU
SS10017-I
Analog module with 8 current inputs

General description

The device SS10017-I converts up to 8 analogue input signals into engineering units in digital format. The data are transmitted with MODBUS RTU/ASCII protocol over the RS-485 network.
It is possible to connect on input 8 current signals up to ± 20 mA.
By programming, it is possible to execute the scaling of the measure of input up to ± 32768 points obtaining in the dedicated registers the measure of the channel in the desired format.
The device guarantees high accuracy and stable measure versus time and temperature.
To ensure the plant safety, a Watch-Dog timer alarm is provided.
The isolation between the parts of circuit removes eventual ground-loop effects, allowing the use of the device even in the heavy environmental conditions.
The device is housed in a 6 module DIN rough self-extinguishing plastic box for mounting on EN-50022 standard DIN rail.

Main features

  • Modbus Slave device on RS-485
  • Modbus RTU/ Modbus ASCII protocol
  • 8 input channels dedicated to ± 20 mA
  • Communication parameters configurable by dip-switches
  • Watch-Dog Alarm
  • Remotely Configurable
  • 1500 Vac 3-ways Galvanic Isolation
  • LEDs of signalling on front side for power supply and communication
  • Connection by removable screw terminals
  • High Accuracy
  • CE mark
  • DIN rail mounting in compliance with EN-50022

Manuals and guides

Datasheet SS 10017-IDatasheet SS 10017-I
User Guide SS 10014User Guide SS 10017-I
IOLOG LeafletIOlog series illustrative leaflet
IOLOG LeafletCE Declaration of Conformity
Webser I/O ModulesIndustrial I/O Modules

More Information
Maximum current consumption 45 mA @ 24 VDC
Communication protocol Modbus ASCII, Modbus RTU, Modbus TCP (using SS10580 converter)
Insulation voltage 1500 Vca @ 50 Hz for 1 minute between inputs, outputs, serial and supply
EMC Immunity conform to EN 61000-6-2
EMC Emissions conform to EN 61000-6-4
Supply voltage from 10 to 30 VDC
Polarity inversion protection maximum 60 VDC
Humidity operating environment from 0 to 90 % (non condensing)
Storage temperature from -40 to +85 ºC (without ice)
Material self-extinguishing plastic
Mounting on EN-50022 DIN rail
Weight about 200 g
Temperature operating environment from -10 to +60 ºC
Write Your Own Review
You're reviewing:SS 10017-I Distributed I/O device in 6 DIN module box 8 inputs for mA over RS-485